Body Champ TRIO-TRAINER BRT1875, Руководство пользователя

Страница: 14 / 24

BRT1875 BRT2885 Page 12
Assembly STEP 6
Hardware Required
A. PULSE HANDLEBAR
I
nstall the
Pulse Handle Bar (#13)
on the rear side of the
Center
Post (#02)
as shown in the illustration below using two
Bolts (#29)
.
Please ensure the wire of the
Handle Pulse (#70)
is free and clear,
avoiding pinching it during this assembly step. You will need to
connect this wire to the
Monitor (#69)
later.
B. COMPUTER
Remove the four
Screws (#32)
that are pre-assembled on the
Monitor (#69)
. Set them aside as they will be used later in this pro-
cess. With the help of an assistant, connect the
Main Sensor Wire
(#71)
to the corresponding wire on the
Monitor (#69)
(diagram A).
Connect the end of
Hand Pulse (#70)
to the
Monitor (#69)
by
inserting it into the back socket as illustrated below (diagram B).
Being careful not to pinch/damage any of the wires, attach the
Monitor (#69)
to the bracket on the
Center Post (#02)
by using the
four
Screws (#32)
that were previously removed.
A.
B.
#29 Bolt (M8x30mm)
[2 pieces]
#32 Screw (M5x12mm)
[4 pieces]