background image

General Information

Page 1 

Warranty

Body Flex Sports warrants your product for 
a period of 1 year for the frame and 90 days 
on all parts if the item is used for the intended 
purpose, properly maintained and not used 
commercially.  Any alterations or incorrect 
assembly of the product will void this warranty.  

Proof of purchase must be presented for any 
warranty validation (no exceptions).  This 
warranty applies to the original purchaser only 
and is not transferable.

This warranty does not cover abuse or defects 
caused during use, storage or assembly.

During the warranty period, Body Flex Sports 
reserves the right to:

a).   provide replacement parts to the 

purchaser in an effort to repair the item.

b).  repair the product returned to our 

warehouse (at the purchaser’s cost).

c).  replace the product if neither of the two 

previously mentioned actions effect repair. 

This warranty does not cover normal wear and 
tear on upholstery.

Questions

If you have any questions concerning the 
assembly of your item or if any parts are 
missing, please DO NOT RETURN THE 
ITEM TO THE STORE OR CONTACT THE 
RETAILER.  Our dedicated customer service 
staff can help you with any questions you may 
have regarding the assembly of this unit and 
can also mail you replacement parts.  

Customer Support

Customer Support is open 9:00 a.m. to 5:00 

p.m. (Pacific Time) Monday through Friday.  

Please contact us by any of the following 
means.

Body Flex Sports, Inc.
21717 Ferrero Parkway, Walnut, CA 91789
Telephone: (888) 266 - 6789
Fax: (909) 598 - 6707

Email: [email protected]

Safety

Before you undertake any exercise program, 
please be sure to consult with your doctor.
Frequent strenuous exercise should be 
approved by your doctor and proper use 
of your product is essential. Please read 
this manual carefully before commencing 
the assembly of your product or starting to 
exercise.

• Please keep all children away from this item 

when in use. Do not allow children to climb or 
play on them when they are not in use.

• Supervise teenagers while they use this unit.

• For your own safety, always ensure that there 

is at least 3 feet of free space in all directions 
around your product while you are exercising.

• Regularly check to see that all nuts, bolts and 

fittings are securely tightened. Periodically 

check all moving parts for obvious signs of 
wear or damage.

• Clean only with a damp cloth, do not use 

solvent cleaners. If you are in any doubt, do 
not use your product; contact CUSTOMER 
SUPPORT.

• Before use, always ensure that your product 

is positioned on a solid, flat surface. If 

necessary, use a rubber mat underneath to 
reduce the possibility of slipping.

• Always wear appropriate clothing and 

footwear such as training shoes when 
exercising. Do not wear loose clothing that 
could become caught in moving parts during 
exercise.

• Do not use this unit if it is not functioning 

properly or if it is not fully assembled.

• Do not use this unit for commercial purposes.

Storage and Use

Your product is intended for use in clean 
dry conditions. You should avoid storage in 
excessively cold or damp places as this may 
lead to corrosion and other related problems.

Weight Limit

Your product is suitable for users weighing:
250 pounds or less.

BRB 3800

Содержание BRB 3800

















Отзывы: