Safety & Maintenance
BF 620
Page 10
• Make sure all nuts, bolts, and screws are tightened prior to use.
• Be sure that all adjustment locking devices and safety devices are properly engaged prior to use!
• Never over-tighten the above-mentioned devices and parts to avoid damage to the unit.
• Check for loose parts and components prior to use.
• Check to see if there are any tears or bends in the welding or metal prior to use.
• Extreme care must be taken to not allow your feet, fingers, hair, clothing, and/or any loose items to be
snagged into any portion of the bike when the flywheel is in motion. Failure to follow these instructions
could result in serious injury, including the loss of fingers.
• Always wait for the flywheel, pedals, and cranks (which can gain great momentum during riding) to
come to a complete stop before dismounting the bike to avoid serious injury.
•
T
o avoid rust or corrosion to the flywheel caused by moisture and sweat, we advise wiping and drying
the flywheel and surrounding parts with a dry absorbent towel after each workout session.
• Do not use solvent cleaners. If you are in any doubt, do not use your cleansing product;
contact CUS
T
OMER SUPPOR
T
.
• When bike is not in use, the resistance should be left loose, NOT tightened down against the flywheel.
Y
ou can do this with the easy-to-adjust tension knob.
This will ensure longer life of the Friction Belt.
•
Y
ou can maintain your bike by using certain products. However, be careful not to allow lubricants
to get onto the circumference of the flywheel where the Friction Belt rubs against. This will
prevent the friction mechanism from working properly. Please contact our CUS
T
OMER SUPPOR
T
if you have questions regarding the cleaning of your bike.
A d d i t i o n a l S a f e t y
M a i n t e n a n c e & C a r e
