BCR1000 / 890
Page
15
Safety and Maintenance
•
Make sure all nuts, bolts, and screws are tightened prior to use.
•
Be sure that all adjustment locking devices and safety devices are properly engaged prior to use!
•
Never over-tighten the above-mentioned devices and parts to avoid damage to the unit.
•
Check for loose parts and components and make proper adjustments prior to use.
•
Check to see if there are any tears or bends in the welding or metal prior to use. If tears or bends are found,
DO NOT use the unit and contact our CUSTOMER SUPPORT.
•
Extreme care must be taken to not allow your feet, fingers, hair, clothing, and/or any loose items to be snagged into any portion of
the bike when the unit is in motion. Failure to follow these instructions could result in serious injury, including the loss of fingers.
•
Always wait for the pedals and other moving parts (which can gain great momentum during riding) to come to a
complete stop before dismounting the unit to avoid serious injury.
NOTE :
Always wait for the pedals and/or any other moving parts (which can gain great momentum during exercise) to come to a com-
plete stop before dismounting the unit to avoid serious injury.
•
To reduce speed on the vertical climber, you may use the combinations of your feet on theLeft/Right Pedal
(#10L/10R)
and your
hands on both the
Hand Grip
(#11)
or Left/Right Handlebar
(#07L/07R)
to slow down safely and safely apply
counter-momentum.
• Wait for the pedals to come to a complete stop and find stability and support with the
Left/Right Handlebar
(#07L/07R).
• Now you may safely dismount the unit.
NOTE :
To safely move, transport, and/or store the unit, please seek the help of capable assistants (minimum of 2 people).
The unit has integrated Transport Wheel
(#22)
and Fixed Handlebar/Transport Handle
(#57)
purposely intended to help ease
this process.
•
Position one person on each side at the front of the unit toward the Left/Right Handlebar
(#07L/07R)
(one person on the left, and
one on the right).
•
Have each person use both hands to grip the corresponding Left/Right Handlebar
(#07L/07R)
and
Transport Handle
(#57)
. (These are the safest areas to avoid injury during this process.)
•
Have both people simultaneously lift the rear end of the unit, leaning the weight and pressure into the front of the unit and onto the
Transport Wheel
(#22)
to move/transport the unit to the desired area.
•
Please review all safety instructions and warnings in this entire Owner’s Manual, as well as any safety/warning labels affixed to the
product before use.
•
Do not use solvent cleaners. If you are in any doubt, do not use your cleansing product; contact
CUSTOMER SUPPORT.
•
The specific parts on your unit which may see possible signs of wear after prolonged use are listed as follows (please check these
parts before each use): Left/Right Handlebar
(#07L/07R)
; Hand Grip Foam
(#12)
; Bungee Cord
(#43)
; Cable
(#51)
.
•
For any replacement warning labels, please contact our CUSTOMER SUPPORT at
1 (888) 266-6789
or
1 (909) 598-9876
, or mail in a written request to:
Body Flex Sports Inc.
21717 Ferrero Parkway
Walnut, CA 91789
More detailed information about how to reach our CUSTOMER SUPPORT may be found on Page 2 of the
Owner’s Manual under the “CUSTOMER SUPPORT” section.
Safety & Warning
How To (Emergency) Stop
How To Move/Transport The Unit
Storage
Maintenance & Care
