BCR1000 / 890
Page
14
Computer Operation
*IMPORTANT NOTE :
Please remember that the functions in this computer are only meant to be tools to monitor your workout progress; they are not meant to provide medical
information or be used for medical purposes. Please consult a physician before beginning any workout program.
TIMER (TIME)
: Time-keeping to record workout session.
COUNT (CNT)
: Accumulate exercise steps during workout session.
CALORIES (CAL)
: Total calories burned during workout session.
REPS/MIN
(RPM)
: Displays steps per minute during workout session.
SCAN
: The monitor will then rotate displaying through the following functions: TIME - CAL - RPM
1.
If the display is faint or shows no figures ,please replace the batteries.
2.
The monitor will automatically shut off if there is no signal received after 4 minutes .
3. The monitor will auto-power on when exercise and/or motion input is detected.
4. The monitor will automatically start calculating when you start to exercise and will stop calculating when you stop
exercising for 4 seconds .
FUNCTION
NOTE
Specifications
TIME
00:00 - 99:59 min:sec
COUNT
0 - 9999 times
CALORIES
0 - 9999 KCal
REPS/MIN
0 - 9999 times/min
BATTERY TYPE
LR44 (1)
OPERATING TEMP
32°F - 104°F
STORAGE TEMP
32°F - 160°F
FUNCTIONS
MODE/SELECT
: Hold the key for 4 seconds to have
all function values reset (total reset), then select the
function
42
HOW TO INSTALL AND REPLACE BATTERY
A.
Slowly and carefully, use a flathead screwdriver to
disengage the Monitor
(#40A)
from the Shroud
(#42)
so you can lift it up slightly (keeping all wires
connected) for access to its underside.
B.
Use the flathead screwdriver to gently remove the
old battery and replace with one new LR44 battery,
ensuring the +/- orientation is correct as shown in
the illustration.
NOTE :
1. Only use LR44 battery for replacement.
2. Battery disposal should be handled according to all
state and federal laws and regulations.
3. Do not dispose of batteries in fire.
40A
