Assembly Instructions
BCB3890
Page 10
Others
#20. Carriage Bolt (3/8”x2-7/8”) [4 Pieces]
#21. Hex Bolt (3/8"x3-1/8") [4 Pieces]
#25. Lock Nut (3/8") [8 Pieces]
#26. Lock Nut (5/16") [2 Pieces]
#27. Large Curved Washer [4 Pieces]
#28. Curved Washer (3/8") [8 Pieces]
#16. Lock Knob [2 Pieces]
The assembly process is now complete. However,
for your
own safety, please make sure to read this entire Owner’s
Manual which includes safety instructions and warnings, as
well as any safety/warning labels affixed to the product
before use.
For your safety, please visually and functionally inspect and
test the unit after assembly is complete.
A
C
A s s e m b l y S t e p 5
Hardware Required
BOLT
WASHER
NUT
A). With the help of an assistant, attach the
Right Upright
Frame (#01)
to one
Rear Stabilizer (#09)
by inserting two
Carriage Bolts (#20)
up through the
Rear Stabilizer (#09)
and
Right Upright Frame (#01)
and secure with two
Curved Washers (#28)
and two
Lock Nuts (#25)
. Repeat
this process to assemble the
Left Upright Frame (#02).
B). Connect the
Right Upright Frame (#01)
and
Left Upright
Frame (#02)
by using the
Rear Cross Tube (#03)
in the
mid-span as illustrated. Beginning on the right side, insert
two
Hex Bolts (#21)
through two
Large Curved Washers
(#27)
, and through the
Right Upright Frame (#01)
, securing
with two
Curved Washers (#28)
and two
Lock Nuts (#25).
Note: The
Adjustable Upright Tubes (#04)
are pre-installed
on the
Right Upright Frame (#01)
and the
Left Upright
Frame (#02)
.Adjust the
Adjustable Upright Tubes (#04)
to obtain the desired height and insert the
Lock Knobs
(#16)
on both sides to secure it in place. Always ensure that
after any adjustments are made, both sides are even and
level to prevent serious injury and even death.
C). Using the diagram as reference, insert the
Right and Left
Safety Hooks (#15)
and
(#14)
into the holes on top of both
Adjustable Upright Tubes (#04)
. Secure each using one
Lock Nut (#26)
on each side.
Repeat this process to assemble the
Left Upright Frame
(#02).
B
