Customer Service 1-888-707-1880
Dyaco Canada Inc. 2014
Email: [email protected]
4
Important Electrical Information
WARNING!
●
NEVER
use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power cord away
from any moving part of the treadmill including the elevation mechanism and transport wheels.
●
NEVER
remove any cover without first disconnecting AC power.
●
If voltage varies by ten percent (10%) or more, the performance of your treadmill may be affected.
Such
conditions are not covered under your warranty
. If you suspect the voltage is low, contact your local power
company or a licensed electrician for proper testing. See Diagnosis Guide, page 23.
●
NEVER
expose this treadmill to rain or moisture. This product is
NOT
designed for use outdoors, near a pool or
spa, or in any other high humidity environment.
This product must be grounded.
If the treadmill should malfunction or breakdown, grounding provides a path
of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord
having an equipment-grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the
product is properly grounded. Do not modify the plug provided with the product if it will not fit the outlet;
have a proper outlet installed by a qualified electrician.
●
NEVER
operate this treadmill without reading and completely understanding the results of any operational
change you request from the computer.
●
Understand that changes in speed and incline do not occur immediately. Set your desired work level on the
computer console and release the adjustment key. The computer will obey the command gradually.
●
NEVER
use your treadmill during an electrical storm. Surges may occur in your household power supply that
could damage treadmill components.
●
Use caution while participating in other activities while walking on your treadmill, such as watching television,
reading, etc. These distractions may cause you to lose balance or stray from walking in the center of the belt;
which may result in serious injury.
●
NEVER
mount or dismount the treadmill while the belt is moving. Our treadmills start with at a very low speed
and it is unnecessary to straddle the belt during start up. Simply standing on the belt during slow acceleration is
proper after you have learned to operate the unit.
●
Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.).
Do not use excessive pressure on console control keys. They are precision set to function properly with little
finger pressure. Pushing harder is not going to make the unit go faster or slower. If you feel the buttons are not
functioning properly with normal pressure, contact your dealer.
