
STEP 2. ATTACHING THE HANDLEBAR
Attach the handlebar (3) to the welded bracket of the rear frame (1). Secure using two carriage
b
olts (43) and two curve washers (57)
, two spring washers (58) and two cap nuts (59).
Connect the tension/pulse wire (68) into the extension tension/pulse wire (69).
Remove the seat adjustment knob (21) and slide the rear frame (1) to your desired location and
secure with the seat adjustment knob (21).
NOTE
: 1.Ensure the bolts are fastened securely to avoid injuries. It may be necessary to adjust the
stopper (24) to level your unit.
2. The tension control is found at the ends of the handlebar.To increase the tension press the
UP button, to decrease the tension press the DOWN button.
Customer Service 1-888-707-188
Maurice Pincoffs Canada Inc.
©2008
6