MONITOR INSTRUCTION
Function button
MODE:
Press mode button to select the desired function
Press
mode
button
for
three seconds to reset all values to zero
Function
Scan:
Displays each function in sequence every 4 seconds. The display
loop is time, speed, distance, calories and pulse.
Time:
Displays your elapsed workout time up to 99:59
Speed:
Displays the current speed up to 99.9 KM
per hour.
Distance:
Displays the cumulative distance traveled during your workout up to
99.9KM
Calorie
Displays the cumulative calories burned at any given time during your
workout up to 999 cal.
NOTE: This data is a rough guide used for comparison of different
exercise sessions, which cannot be used for medical purposes.
Gripped pulse
The monitor will display the user’s current heart rate in beats per
minute during the workout. Both hands must hold the gripped pulse
for a heart rate reading during your workout.
NOTE: This data is a rough guide used for comparison of different
exercise sessions, which cannot be used for medical purposes
Remarks:
1.
The monitor will turn on automatically by pressing any key or starting your exercise
program.
2.
The monitor will shut off automatically if no signal is detected for four minutes and
keep all function values. You may press any key or start the exercise program to
have the monitor resume.
3. If monitor is illegible or partial segments appear, remove batteries and re-install.
4. Monitor requires 2 “AA” batteries.
5. The tension control is found at the end of the handlebar.
Customer Service 1-888-707-188
Maurice Pincoffs Canada Inc.
©2008
9