INSTALLATION INSTRUCTIONS
Step 2 On the bottom of the bumper where the plate goes under the crash bar you will attach
the bumper to the crash bar by using 10M-40M hex bolts. The available holes in the crash bar
can vary based on the year of the vehicle. You should be able to line up the holes and attach.
There could be a gap between the lip of the bumper and the crash bar. This is intentional to
compensate for model year variances. It is not necessary to tighten the bolt so that the gap
disappears.
Step 3 Once all head ware has been attached, confirm bumper position and begin to tighten all
hardware.
Step 4 Install winch as per the winch manufacturer instructions. The bumper is predrilled for the
industry standard 10"x4" footprint. Also refer to winch manufacturer's winch size based on the
type of vehicle the winch is being used on.
