INSTALLATION INSTRUCTIONS
Page 3 of 3
Rear
Rear
Rear
(2) 14mm Hex Bolts
(2) 14mm Lock Washers
(2) 14mm Flat Washers
(Fig 8) Attach the driver/left side of the Bumper
to the Nut Plate in frame and threaded holes
Reuse (2) factory bolts
(Fig 7) Attach the driver/left side of the Bumper
to the Nut Plate in frame and threaded holes
Reuse (2)
factory bolts
(Fig 5) Insert 14mm Double Nut Plate into
open end of frame (driver/left side pictured)
(Fig 6) Line up Double Nut Plate with slots
in side of frame (driver/left side pictured)
