ECO-SERIES REAR BUMPER 2007-2016 CHEVY
SILVERADO\GMC SIERRA 1500
IMPORTANT
: Sensors fit snug in sockets.
The 4mm Screws are only used to apply
slight pressure to lock the sensors in place.
Tighten both screws evenly until they touch
the sensor body only. Do not overtighten
screws or damage to sensors will result.
Fig 13
License plate light
(2) License plate
mounting nuts (plugs)
Fig 14
Remove screens if necessary for additional
clearance around or access to lights
(Fig 15) Push sensor into mounting sleeve.
Use 4mm Screws to lock sensor in place.
(2) 4mm Screws
Remove Plugs
(2) 6mm Screws
(4) 6mm Flat Washers
(2) 6mm Nylon Lock Nuts
When it comes to quality off-road bumpers, Body Armor 4x4 is the brand you can depend on.
