5
CAUTION
Make sure the brush wire is capable of moving
freely in the slot in the brush box. Failure to do
so may cause the brush to get stuck in the brush
box and will result in poor motor performance.
WARNING
The motor frame ground wire is connected to
the same screw as one of the brush wires. If the
ground wire was removed, make certain that it
is securely reconnected. Failure to do so may
result in personal injury.
STEP #8 – Inspect Springs
Inspect the springs to make sure they weren’t damaged during their removal. If
they are uncoiled or otherwise damaged, record the product type and serial
number from the motor nameplate. Contact your supplier, any Authorized
Bodine Distributor, or our Service Department. You will find more information
on how to contact Bodine Electric at:
www.bodine-electric.com
Make sure brush
wire is in slot
BAD (uncoiled) GOOD
Figure 9 – Connect brush terminal.
Figure 10 – Put brush wire in slot.
Figure 11 – Comparison of bad and good springs.
