5
EN
I
I
– Installation
2.1 Clock installation
2.1.1 Mounting without back cover
According to the model of the clock make the cut-out following the dimensions listed in table below
Dimensions in mm
a) Insert the clock in the cut-out in order to mark the position of the mountig screws.
b) Remove the clock and drill 4 holes Ø 6mm to insert the wall plugs.
c) Feed the power cable and the synchronisation cable throught the cut-out
d) Connect the clock, adjust the brightness (refer to page 7) and set the time (refer to page 10).
e) Fix the clock to the wall with the 4 screws Ø4 mm
A
B
C
D
E
Style 5S OP
46
400
365
68
107
Style 7S OP
440
404
85
123
Installation
without
the back cover
