Bodet Profil TGV 950, Инструкция по установке и эксплуатации

Страница: 4 / 12

4
I - INITIAL VERIFICATION
Thank you for choosing a BODET clock. This product has been carefully designed for your
satisfaction based on ISO9001 quality requirements. We advise you to read this manual
thoroughly before attempting to manipulate the clock.
Keep this booklet during all the life of your clock, so that you can refer to it each time it is
necessary.
Bodet accepts no responsibility for accidents resulting from any use not conforming with the
above provisions.
Any modification to the product will invalidate the warrantee.
1.1 Unpacking the clock
Unpack with caution and check the contents of the packaging. It must contain :
- the TGV clock,
- for radio synchronised models : the antenna,
- a key to open the casing,
- an antistatic cleaning kit,
- this booklet.
Versions : a label inside the clock specifies what model the clock is :
AFNOR HMS or AF HMS = the clock is a receiver driven by : a master clock that sends
AFNOR NFS-87500A coded time messages or a radio receiver antenna, and powered by
240 VAC, with a servo second hand.
1.2 Cleaning
Use an antistatic product of similar type to the one shipped in the original packaging. Never use
alcohol, acetone or any other solvent liable to damage the casing and glass on your clock.