7
1.3 netsilon presentation
1.3.1. Front panel
The Netsilon front panel contains:
>
a USB
1
1
port
>
three status LEDs for power supply, synchronisation and alarms (Power, Sync. and Alarm)
2
.
See Chapter
6.1 status of leDs on front panel
>
a two-line LCD display
3
,
>
control keys
4
for initial setup (full setup from the web server).
1.3.2. Rear panel
>
NETSILON 7 (100-240 VAC + 18-36 VDC)
1
Earth.
2
On/Off switch.
3
Mains. IEC 320 AC power inlets.
4
18-36 VDC power supply terminal. 3.81mm terminal.
5
Slots for option cards:
>
NETWORK option card (RJ45), ref. 907920.
>
AFNOR option card, ref. 907940.
>
PULSE option card, ref. 907942.
>
CURRENT LOOP option card, ref. 907944.
>
NETWORK FIBER option card (2 SFP), ref. 907921.
The option cards are installed in our production factory. For subsequent installation, refer to the expansion card
installation guide.
6
Common/Normally-Closed/Normally-Open relay contact output.
If contact Normally-Open: no alarms / If contact Normally-Closed: alarms.
1
3
4
2
1 2
3
6
5
5
5
5
7 8 9
10
slot a
slot B
slot C
slot D
1
Netsilon supports USB keys formatted to AT16/FAT32 and NTFS
