![background image](http://html.mh-extra.com/html/bodet/netsilon-11/netsilon-11_installation-manual_2782418007.webp)
7
6) Clip the electronic card onto the connector
A
, then fix it in place using the two Torx T8 screws
B
:
A
B
B
7) Attach the aluminium cover in order to close up the space around the option card:
Repeat these 5 steps for each option card you wish to install.
Do not use screws other than those supplied, as inappropriate lengths may damage some components.
For the IRIG INPUT and IRIG OUTPUT option cards, replace the washer and screw the nut back onto
the BNC connector(s) to tighten it onto the aluminium cover.
8) Perform the following operations:
- Ethernet RJ45 / Ethernet SFP / PTP option card : connect the SATA cable linking the Network card(s) or PTP to
the Netsilon motherboard :
Slot A
Slot B
Slot C
Slot D
SATA
slot A
SATA
slot B
SATA
slot C
SATA
slot D
This operation is valid for the Network option card (RJ45), the Network Fiber option card (SFP) and
the PTP option card (RJ45 / SFP).
Be sure to connect the SATA cable to the correct connector on the motherboard corresponding to the
slot where the option card is installed.