![background image](http://html.mh-extra.com/html/bodet/harmonys-trio/harmonys-trio_installation-and-operating-instructions-manual_2782415014.webp)
14
4.4 Alarm configuration
This page is used to enable device supervision, to define the information to be transmitted
and the destination server. One or more settings can be defined and configured as alarms.
The following information is displayed:
-
Enable SNMP checkbox:
activates the SNMP network service for device supervision from a
control PC.
- Version:
choice of SNMP protocol version.
- Community
: A set of Harmonys Trio defined by the user. All the Harmonys Trio on the network
must have the same Community name.
- Tick SNMP Trap box:
activates (or not) the automatic sending of error messages to SNMP
managers.
- SNMP Manager 1/2/3
: IP addresses of servers receiving alerts from the clocks. SNMP Manager
redundancy increases the reliability of alerts.