34
2.3 Electrical connections
Most of the BTX6220 WP cabling is done at the factory. These
instructions deal with the cabling to be done during the installation
at the customer site.
1/ Open all the access doors.
2/
Connect the 240V + earth power cable to the
terminal block of the BTX6220 WP(A). (the power
cable (3x1,5²) is not supplied by BODET).
.
2.4 DIPs settings
Main panel card:
On the first DIP bank
Dips 1 to 4 are used for the factory setting of the panel.
Out of the factory the dips are set as follow:
Dip 1
Dip 2
Dip 3
Dip4
on ↑
on ↑
off ↓
off ↓
Dips 5 to 7 are used to identify each panel (If several panels are used on the same site
each panel must have its own number.).
A
First DIP bank
Second DIP bank
N° panneau
Dip 5
Dip 6
Dip 7
1
off ↓
on ↑
on ↑
2
on ↑
off ↓
on ↑
3
off ↓
off ↓
on ↑
4
on ↑
on ↑
off ↓
5
off ↓
on ↑
off ↓
6
on ↑
off ↓
off ↓