7
VII - Use of possession time keyboard
1/ Pressing START/STOP (1) starts the shot clock timer. Pressing
this key again stops the timer.
When the timer value reaches 0, a sound signal (horn or buzzer) is
activated for a duration of 3 sec. The LED du Time Pad turns red
when the shot clock timer is stopped and shines green when the timer
is timing.
2/ Pressing the RESET Poss (2) key or the RESET 14s (8) key for more
than X seconds causes the Time Pad display and the
display panels
to go blank. When releasing the key, the Shot clock timer take its
reset value of 24 seconds or 14 seconds according to the key that
was pressed.
3/ Pressing the CLEAR (3) key (The Time Pad displays --) causes the Display panels to go blank Pressing this key again
enables the display of the running value of the timer, without modifying the shot clock status.
4/ Pressing the Horn (4) key stops the horn blowing that was automatically started when the timer value reached 0.
This key does not activate the horn.
Modification of the running time of the shot clock
1/ Press START/STOP (1) to stop the timer.
2/ Press the Time Pad C (6) key.
The Time Pad display, the Time Pad LED (9) and the display panels start blinking.
3/ Pressing once on the + (5) key increments the timer value by 1 second.
This value cannot be greater than the memorised value of the RESET Poss (2) (default 24 sec.).
4/ Pressing once on the - (7) key decrements the timer value by 1 second.
5/ Press the C (6) key to go bacl to the normal mode of operation.
Retrieval of the shot clock timer value
1/ If, by accident, the RESET Poss (2) was pressed during the shot clock count down it is possible to retrieve the timer
value by pressing the CLEAR (3) key within the 2 sec that follow pressing the RESET Poss (2).
Modification of the memorised RESET value (default 24 sec)
1/ Press START/STOP (1) to stop the timer..
2/ Press the C (6) key for 3 seconds.
TheTime Pad display and the display panels start blinking. The displayed value is the value of the current RESET.
3/ Pressing once on the + (5) key increments the value of the RESET Poss by 1 second.
This value cannot be greater than 99 seconds.
4/ Pressing once on the - (7) key decrements the value of the RESET Poss by 1 second.
5/ Press the C (6) key to go bacl to the normal mode of operation.
This parameter is not saved in case of power loss or if the Time Pad is disconnected after a game.
Does not work with the RESET 14s (8) key.
8006 display panel brightness adjustment
1/ Press the (+5) key of the possession keyboard during 3 sec. The keyboard LED screen display the current luminosity
level from 1 to 5.
2/ Pressing of the + (5) key during normal operation increases the display panel brightness.
3/ Pressing of the - (7) key during normal operation decreases the display panel brightness.
4/ Validate with the C (6) key.
This parameter is not saved if there is a power failure or when the possesion keyboard is disconnected at the end of the match.
4
1
2
3
6
5
7
8