Böcker TL 1512, Руководство по эксплуатации

Страница: 97 / 115

Steel frame Table form lift TL 1512
213300043 97
11.3 Maintenance plan
In the following section the maintenance tasks necessary for an
optimal and trouble free operation are described.
If an increase in wear and tear is detected during the regular
inspections the maintenance intervals should be shortened
according to the actual signs of wear.
For queries on maintenance work and intervals contact the
manufacturer, see page 2 for the service address.
NOTE!
The information below refers to the daily use during
a single work shift. If using the system continuously
or during several shifts, the maintenance intervals
are considerably shorter. Please contact the
manufacturer, see page 2.
Interval Description Task Comment To be
performed by
weekly Instruction and load
sticker Visual inspection
whether mounted and
legible Operator
EMERGENCY OFF
button on platform,
ground station Function check The lift must be
completely inoperable if
the EMERGENCY OFF
button is pressed. Operator
Limit switch on platform
gate, ramps Function check The lift must not start to
move if the doors,
ramps are open Operator
Trailing cable Use talcum powder to
coat the cable. Check for damage. Operator
FI circuit breaker Trigger and check
function Customer
service
technician
Grease pump Add lubricant Adhesive lubricant
OKS495, from OKS Customer
service
technician
Load position gates Inspect locking devices
The lift must not start to
move if the loading
position doors are open
Operator