BOCK floorline 9.5 80, Руководство по сборке и эксплуатации

Страница: 35 / 44

35
6 Cleaning, maintenance and disinfection
The individual bed elements consist of high quality materials. The surfaces of the steel
tubes are covered with a durable polyester-powder coating. All surfaces of the wooden
parts are surface-sealed with an ecologically coating that is low on harmful substances. All
bed elements are easy to clean and cared for using wipe and spray disinfection means
according to the applicable cleaning requirements with respect to the various areas of
application. Observing the following care instructions will retain the usability and visual
appearance of your nursing care bed for a long time to come.
6.1 Cleaning and care
Steel tubes and vanished metal parts:
Please use a wet wipe and a regular mild household detergent for the cleaning and care
of these surfaces.
Wooden-, decorative-, and plastic elements:
All standard furniture cleaners and cleaning detergents can be used. Using a wet wipe
without detergent additives for the cleaning of the plastic elements should generally be
sufficient. For care of the plastic surfaces use a product that is specifically suitable for
plastics.
Drive:
To prevent the intrusion of moisture into the motor housing, we recommended using only
a damp rag to clean outside housing.
Spring systems ripolux neo:
Use a damp rag without adding any detergents, or, if deemed necessary, a detergent that
is exclusively suitable for plastics and clean the spring elements made of plastics. In case
of heavy contamination, remove the spring elements from the supporting elements and
the supporting elements from the frame of the lying surface. The dismounted plastics el-
ements can be rinsed or spray-washed with hot water to get them clean. For the disinfec-
tion, the components should be sprayed with a detergent suitable for plastics. Most of the
moisture drips off the plastic surface by slightly shaking it, while the rest will dry on its
own within a very short time. Remount the elements after they have completely dried. If
required, you can also remove each of the individual lying surface elements completely
from the frame to clean them.