Boca SuperX SVGA25, Руководство по установке

Страница: 22 / 44

22
SuperX VGA by BOCA
In this Manual On README
Microsoft Windows AutoCAD Rel. 11,12
Autoshade
3d Studio
Lotus 2.x, 3.0, 3.1
Microsoft Word 5.0, 5.5
WordPerfect 5.1
NOTE: To use the 800 x 600 or 1024 x 768 graphics display
drivers, you must have a multiple frequency monitor capable of
displaying that resolution. Standard VGA monitors (such as
IBM’s analog monitors) do not have that capability.
5.1 Installing the Display Drivers
IMPORTANT: If you are installing these drivers, make sure you
also install the Utilities which include CLMODE.
• Make sure the Boca SuperX VGA is present (physically
installed) BEFORE installing any drivers.
• Insert the diskette into your system drive A:. (or B:) and
change to either A: or B: as necessary.
• Type INSTALL and follow all on-screen instructions.
• After an introductory screen, you will be presented with a list
of available disk drives. Either accept the default disk drive of
C: or choose any listed drive. You will then see a screen
containing driver choices as shown on the following page.