Boca BASIC VGA VGA006, Руководство по установке

Страница: 22 / 40

22
BASIC VGA by BOCA
E.2 Driver Installation
NOTE: To use the 800x600 graphics display drivers, you must have a
multiple frequency monitor capable of displaying that resolution.
Standard VGA monitors (such as IBM’s analog monitors) do not have
that capability.
Installing the Display Drivers
• Make sure the Basic VGA board is present (physically installed)
BEFORE installing any drivers.
• Insert the Basic VGA display driver diskette into your system floppy
drive (A: or B:). Type A:\INSTALL or B:\INSTALL, and follow all
on-screen instructions.
• After an introductory screen, you are presented with a list of available
disk drives. Either accept the default disk drive of C:\, or choose any
listed drive. You will then see a screen similar to the one shown on
the following page.
• Select the drivers you want to install. You are offered a default
subdirectory for the driver to be installed in (e.g., \WP51 for
WordPerfect). The default may be changed if necessary. Make a note
of the subdirectories that the drivers/utilities were copied to for future
reference.
• After your selected driver(s) have been installed, you are returned to
the DOS prompt. Refer to the README.TXT file for information on
your particular application or environment. Remember: NEVER
CHOOSE A HIGHER RESOLUTION THAN YOUR MONITOR
SUPPORTS.