Boca Systems BOCALANcard 2000, Руководство по установке

Страница: 10 / 32

10
Boca’s Family of Ethernet Products
Section Two: Installation and Configuration
The BOCALANcard Ethernet Adapter is compatible with
network hardware which complies with IEEE Ethernet 802.3
standards. The BE2000/T offers a twisted-pair connector while
the BE2000/2 offers this plus a BNC connector.
2.1 Inserting the Adapter
Removing the System Cover
These instructions assume an AT-style or compatible machine.
1. Power-down your system and remove the power cord.
2. Use a screwdriver to remove the screws which hold the cover
in place. Obviously, locations and types of screws as well as
type of case cover will vary based on your particular system.
Refer to your computer system documentation for assistance.
3. Carefully slide the cover forward—away from the rear panel.
Be careful not to let the cover catch on internal cables to disk
drives, controllers, or the power supply.