Design and function
Select welding task
099-000143-BOC01
16.11.2009
29
5.7.2
Welding data display
The following welding parameters can be displayed before (nominal values) or during (actual values)
welding.
Parameter Before
welding
(nominal values)
During welding
(actual values)
Welding current
;
;
Welding voltage
;
JOB number
;
Parameter times
;
Frequency, balance
;
Parameter currents
;
not possible
;
possible
5.7.2.1
Welding parameter setting
The parameters that can be set in the function sequence of the machine control depend on the selected
welding task. This means that if for example you have not selected a pulse variant, then you cannot set
any pulse times in the function sequence.
