bObsweep WP260011 Скачать руководство пользователя страница 5

Страница: 5 / 98

•

Leaks from battery cells can occur under extreme usage or temperature conditions. If the liquid

gets on skin, wash quickly with water. If the liquid gets into the eyes, flush them immediately

with clean water for a minimum of 10 minutes, and seek medical attention.

•

Do not use Bob for anything other than his intended purpose, as specified in this manual.

Declaration of Conformity

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications or change to this equipment. Such modifications or change could void the user’s

authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Содержание WP260011


































































































Результаты поиска

Содержание WP260011

Отзывы:

bObsweep WP260011, Руководство пользователя, Страница: 5 / 98

Результаты поиска

Содержание WP260011

Отзывы: