bObsweep Bob Pro, Руководство пользователя

Страница: 26 / 48

Quick Start
Parts and Maintenance
Filters
Filter Frame
High-Efficiency Filter
For fine particles
Electrostatic Filter
For smaller particles
Filters
To maximize Bob’s efficiency, it is best to clean his filters about once a week and replace them about
once every 6 months. Three filters are located inside the dustbin. These filters capture fine particles and
prevent them from escaping the dustbin.
1.
Push down the tab on Bob’s back and
slide the dustbin out.
4.
Replace the filters and the filter tray.
Close the dustbin and slide it back
into Bob.
3.
Remove the filters and brush them with
Bob’s cleaning tool.
Cleaning Bob’s Filters
2.
Lift the tab to open the dustbin. Lift the
filter tray out, using the tabs for leverage.
Parts You’ll Need:
Cleaning Tool
Do not wash the dustbin
without removing the filters
first.
When replacing the filters,
make sure the tab on the
high-efficiency filter faces
up.
Quick Tips:
42 41