Bob’s Space Racers Inc. |
Rescue 1™ Operator’s Manual (V1.SEPT2014)
9
4.
INSTALLATION:
4.1
Parts List Verification:
Check the parts list before installation. Verify that all parts that have been received
and are in good condition.
4.2
Play Zone Requirements:
This machine requires space for playing the game. Be sure to leave enough space
when installing the machine.
4.3
Maintenance Considerations:
This machine requires periodic maintenance that will require access to the rear
access panels of the game. It is highly recommended to leave a space of
approximately 2-3 feet behind the game to allow for such maintenance.
ATTENTION
FOR INDOOR USE ONLY!
This machine is designed for indoor use only.
Never install this machine outdoors or in any of the following:
Locations exposed to direct sunlight
Locations subject to rain or water leakage
Unstable locations or locations subject to vibration
Dusty, hot, or humid locations
WARNING
Be sure to check the ELECTRICAL SPECIFICATIONS. Ensure that this product is compatible
with your locations power supply, voltage and frequency requirement.
A plate describing ELECTRICAL SPECIFICATIONS is attached on the backside of the product.
Non-compliance with the ELECTRICAL SPECIFICATIONS can cause a fire and electrical shock.
Putting many loads on one electrical outlet can cause generation of heat and a fire
resulting from overload.
Be sure to plug the game into the proper A.C. GROUNDED receptacle. Do not use long
extension cords unless absolutely necessary and if so, be sure it is a heavy duty cord of at
least 16 Ga. and no longer than 20 ft. Check the label on the back of the game to make
sure the power requirements of the game match that of your location.
