Bob’s Space Racers Inc. |
Rescue 1™ Operator’s Manual (V1.SEPT2014)
11
4.
I
NSTALLATION
(C
ONTINUED
):
4.5
Installing the Light Tubes:
Tools needed to install the light tubes: Phillip’s Screwdriver
1.
The game will be delivered with two (2) side light tubes for
each side (a total of four (4) light tubes), that need to be
installed.
2.
Remove Phillip’s Head bolts, but retain the bolts to use to
secure the light tubes onto the game.
Phillips’ Head Bolts
3.
Ensure the light tube brackets face downward and that the
wiring harness lines up.
5.
Hold the light tube to allow connecting the wiring harnesses
from the light tube to the game unit, and make the
connection. Ensure the plugs are firmly connected.
4.
Feed all excess wire and the plug into the game cabinet
access hole.
7.
Once the plug and all excess wire is fed into the cabinet, hold
the light tube so that you can secure the light tube into place,
with the brackets on the bottom side of the light tube, using
the Phillip’s head bolts that were removed in Step 2. Ensure
that the wiring and plug do not get pinched while securing
the light tube. Tighten all Phillip’s head bolts into place.
6.
Repeat steps 2-6 for remaining light tubes.
