BOB’S SPACE RACERS® PUPPY JUMP
TM
ARCADE GAME MANUAL
21
3. While the Toy is resting on the Height Block, Press down the Lift Bracket until it stops and is
resting on the Horizontal Support Bar as shown in Fig. 14.
Fig. 14
4. Tighten the four (4) 8-32 screws on the back of the Toy. The Toy is now set to the proper
height.
5. Continue to
“Adjusting the Solenoid Lift Height”
below
.
Adjusting the Solenoid Lift Height
1. Loosen both Locking Collars on the Solenoid Shaft as shown in Fig. 15.
Fig. 15
Lift Bracket
Horizontal
Support Bar
Locking Collars
Allen Wrench
