Bob's Space Racers HANG TIME, Руководство оператора

Страница: 3 / 20

Bob’s Space Racers ®
Inc. ©1976-2019 P a g e | 3
1.0 Introduction
Overview
This manual contains important
information about Hangtime™. Such as: Setup,
instructions how to play, maintenance, troubleshooting, game options settings,
and service. Appendixes A and B contain information about policies, warranty,
and service. Appendix D is a parts breakdown of commonly replaced parts.
Safety
This game has moving parts. Improper operation or use of this game can result in
injury. Sensors signal the operator that a player is standing under the handle bar
mechanism and micro-switches are used to protect the player from excessive
heights by stopping the bar once a specific height from the ground is achieved.
When assembling the game, use caution when operating the winch.
DO NOT
insert any foreign object, such as fingers, into the winch during operation, testing,
or maintenance.
Use Only a GROUNDED AC Receptacle
If you are unsure if your AC receptacle is properly grounded, notify a qualified
electrician to perform this check. Failure to do so could result in improper
operation or damage to the game and could void
this product’s warranty.
Maintenance
Always ensure power is off and fully disconnected from power source when
performing routine or in-depth maintenance. Failure to do so can result in damage
to the game or injury to personnel.
Power Requirements
Domestic Game Power : 110V ± 10V ~14.0 Amps ~1680Watts at 60Hz
Service Power Recommendations: 20 Amps for Game Power
Export Game Power : 220V ± 10V ~7.0 Amps ~1680Watts at 50/60Hz
Service Power Recommendations: 10 Amps for Light Power
WARNING!
Ensure that this product is compatible with your facilities power supply,
voltage and frequency requirement. A label describing Electrical
Specifications is attached to the product. Non-compliance with the
Electrical Specifications can cause a fire and electric shock. Ensure the
game is level before applying power.
Checking Packing List
Check the packing list prior to installation. Verify that all parts that have been
received and are in good and working condition.