6. Daily cleaning and maintenance
8
9
BOBOT ROBOTICS INC.
BOBOT ROBOTICS INC.
Daily cleaning and
maintenance
Daily cleaning and
maintenance
6.1 Cleaning of dust collecting cup
6.2 Cleaning of separation filter
6.3 Cleaning of roller brush
In order to maintain the best cleaning performance, it is recommended to clean the
separation filter every 4-6 times (depending on the actual use).
1.Turn off the power supply and clean the dust collecting cup (refer to "dust
collecting cup cleaning");
2.Hold the dust collecting cup, rotate it anticlockwise and remove it;
Turn off the power supply, press the release button on the extension tube, pull out
the extension tube and the floor brush and place them safely.
Align the bottom of the dust collection cup of the hand-held vacuum cleaner with
the garbage can, press the release button at the bottom of the dust collection cup,
open the bottom cover, gently shake to empty the dust in the dust collection cup,
close the bottom cover and lock it.
Note:
When the dust in the dust collection cup reaches the "Max" position, please
clean the dust collection cup in time to ensure the best dust collection effect.
Warning: Please cut off the power before removing any
3.Hold the separator and rotate it anticlockwise to remove it;
4.Hold the handle of the filter element and lift up the HEPA frame, and rotate it
anticlockwise to remove the HEPA;
5.Clean HEPA, separator and dust collecting cup respectively with soft bristle
brush, and then replace them in reverse order; if separation filter is not installed
correctly, suction will be reduced!
Warning: do not use this machine without separation filter!
Note:
The dust collecting cup and separator can be cleaned directly with water. HEPA
recommends cleaning with soft brush or pat!
