Boann Reverse Osmosis 5-Stage Water Filtration System Скачать руководство пользователя страница 19

19

boannstyle.com

Recommended Filter Replacement Schedule

Pre and Post Filters: Defined as the filter stages Pre (before the R.O. Membrane) and Post (after 

the R.O. Membrane).

Stage 1, 2 & 3 Pre-Filters - When to Conduct a Filter Change.

Stages 1, 2 & 3 are the filtration system’s pre-filters which need to be changed approximately 

every 1,000 gallons or every 6-months. On average households consume about 5 gallons of 

drinking and cooking water daily and, as such, a filter change is required every 6 months or 

sooner. For your convenience, a monthly maintenance schedule checklist is provided on the 

label of each filter to keep record of routine filter maintenance. As an added measure, mark your 

calender for a routine filter change every 6 months.

WARNING! If the pre-filters are not changed before 1,000 gallons of purified water is produced, 

chlorine will bypass the pre-filters, thus entering and damaging the R.O. Membrane, rendering it 

useless and in need of premature replacement. 

Stage 4 - Reverse Osmosis Membrane Replacement 

The R.O. Membrane is the most important component of the Boann Reverse Osmosis 5-Stage 

Water Filtration System. The R.O. Membrane is rated for 4,000-5,000 Gallons of purified water 

production. A new R.O. Membrane will last approximately 3-4 years. However, it is suggested 

replacing the R.O. Membrane every 2 years for system and performance optimization. 

 

• 

A standard household will consume between 3-5 gallons of purified water each day for  

 

 

drinking and cooking. A 3-gallon per day consumption rate over a year’s time is equal to  

 

 

roughly 1095 gallons, which therefore requires the Reverse Osmosis Membrane to be  

 

 

changed about every 3.5 years. 

 

• 

A 5-gallons per day consumption rate over a year is equal to approximately 1825  

 

         gallons which in turn requires the Reverse Osmosis Membrane to be changed    

                  about every 2-2.8 years.

When in Doubt, Replace the R.O. Membrane

Boann recommends to replace the R.O. Membrane if it has never been replaced and if the 

R.O. filtration system is more than 3 years old. If the age of the R.O. Membrane is unknown, it is 

recommended to replace the filter as soon as possible.  

Stage 5 - Post Carbon Filter Replacement

The Post Carbon Filter is the last filtration stage in the Boann Reverse Osmosis 5-Stage Water 

Filtration System. The Post Carbon Filter is rated for 1800-2000 gallons of purified water 

production and should be changed once a year or every second time you change the three 

pre-filters. 

Water Filtration Filter Schedule

Содержание Reverse Osmosis 5-Stage Water Filtration System

























Отзывы: