17
EN
5. Attach the tail servo mount to the tail servo.
6. Center the tail servo and attach the servo arm to
the servo. Attach the ball end to the servo arm.
7. Mount the tail servo assembly to the inside of the
right frame side, as shown.
8. Connect the tail pushrod to the tail servo ball end.
9. Route the servo wires through the tail boom
mounts and under the gyro plate.
Ensure the
wires stay well clear of all rotating parts.
At any point where the servo wires pass through
or cross the frame plates, use sandpaper to round
the edge of the frame plate to prevent the wires
from chafi ng. Use zip ties to secure the wires to
the frame.
10. Re-attach the gyro plate to the frame.
11. Mount the fl ight controller to the gyro plate using
double sided foam tape provided with your fl ight
controller.
12. Review the instructions provided with your fl ight
controller to complete the servo connections and
setup.
Содержание Blade Fusion 270
Страница 1: ...Instruction Manual Bedienungsanleitung Manuel d utilisation Manuale di Istruzioni...
Страница 20: ...20 EN Exploded View 26 34 34 26 33 39 42 43 44 43 43 34 34 36 32 40 41 5 29 30 25 28 9 16 16 16 11 16 24 27 31...
Страница 21: ...21 EN 2 12 1 38 48 47 47 47 49 46 14 46 3 38 45 37 13 17 35 19 6 6 22 22 21 20 7 7 21 8 10 23 15...
