USER MANUAL ~ DRYWALL SANDER MODEL No. BNR7231A
- Page 3-
3. SAFETY INSTRUCTIONS
The following pictograms appear throughout these operating instructions:
Indicates danger of injury, risk to life and possible damage to the appliance
if these instructions are not followed.
Indicates the presence of electric shocks.
Read through these operating instructions ca refully before using the appliance.
Become familiar with the functions and method of operation. To ensure proper
operation, always maintain the appliance according to the instructions. The op-
erating instructions and associated documents should always be kept close to the
appliance.
When using power tools, you must observe the following basic safety precautions
in order to ensure protection from electric shocks, injury and fire. Read and follow
all the instructions before using this power tool. Look after the notes on safety.
Always check if your mains voltage corresponds with the value on the type
plate.
The machine has been double-insulated in accordance with EN60745:
therefore, an earth wire is not necessary.
USE CORRECT SUPPLY VOLTAGE: The power supply voltage must match the
information quoted on the tools identification plate.
USE PROPER EXTENSION CORD: Only use an approved extension cable that is
suitable fqr the machine’s power. The cord must have a diameter of at least 1.5mm2.
When the extension cable is on a reel , unroll the cable in its entirety.
SWITCH OFF THE MACHINE IMMEDIATELY IN CASE OF:
1. Malfunction in the mains plug , power cable or damaging of cable.
2. Broken switch.
3. Smoke or stench of scorched insulation.
4. GENERAL SAFETY RULES
WARNING! Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or
serious injury.
