Mixer Manual 2017.indd • May 31, 2017
Page 2
BN Products - USA
PRODUCT DESCRIPTION
From low-viscosity paints to high-viscosity mortars these
electric mixers will get your job done quicker, safer and eas-
ier than a conventional ½” drill motor. The ergonomically
designed handles and the variable 2-speed motor with soft-
start make the job quicker, safer and easier. The heavy-duty
gearbox and high-torque motor will outlast a standard ½”
drill motor by 3-4 times.
The machines have been designed to mix liquid and powder
building materials such as paint, mortar, adhesive, plaster,
epoxy and similar substances.
The relevant mixing action depends on the consistency of
the materials and the quantity that has to be mixed. This
must be set up for the appropriate mixing paddles.
You must abide by certain safety precautions when us-
ing the equipment, in order to prevent injuries and
damages from occurring. Therefore you must always
read through this operating manual carefully.
PLEASE NOTE - This manual must be kept in a safe
place so that the information that it contains is always
available. This operating manual must accompany the
equipment if it is transferred to someone else.
We do not accept any liability for accidents or damage aris-
ing from ignoring this manual and the safety
instructions.
SAFETY INSTRUCTIONS
Read through these operating instructions carefully before
using these tools. Become familiar with the functions and
method of operation. To ensure proper operation, always
maintain the tools according to the instructions. The oper-
ating instructions and associated documents should always
be kept close to the appliance.
When using power tools, you· must observe the following
basic safety precautions in order to ensure protection from
electric shocks, injury and fire. Read and follow all the in-
structions before using these power tools. Follow the notes
on safety.
Always check ito see if voltage corresponds with the manu-
facturer’s requirements
Our mixers are double-insulated.in accordance with
EN60745; therefore, an ground wire is not required.
USE CORRECT SUPPLY VOLTAGE
The power supply voltage must match the information
quoted on the tools identification plate.
USE PROPER EXTENSION CORD: Only use an approved
extension cable that is suitable..for the machine’s power.
SWITCH OFF THE MACHINE
IMMEDIATELY IN CASE OF:
1. Malfunction in the plug or power cable.
2. Broken switch.
3. Smoke or smell of scorched insulation.
GENERAL SAFETY RULES
WARNING! Read all safety warnings and all Instructions.
Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your elec-
tric power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark ar-
eas invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRIC SAFETY
• Power tool plugs must match the outlet: Never modify
the plug in any way. Do not use any adapter plugs for
grounded power tools. Unmodified plugs and match-
ing outlets will reduce risk of electric shock.
