BN Products BNCE-20-24V SN, Руководство по эксплуатации и инструкция

Страница: 6 / 16

Page | 6
!DANGER: The Cutting Edge is not a waterproof power tool. If it becomes
wet, the power source system may become faulty or the operator may get
an electric shock. Therefore, when it is raining or snowing, never operate
this saw outdoors, on top of buildings or under roofs where rain or snow
enters freely. Do not use where water accumulates or where water splashes.
Operation Instructions
Locate the front handle in the mounting hole that provides the best grip. To operate the
trigger, depress the trigger to start the saw. Start the saw before cutting and then apply a
light pressure moving forward through the cut.
! DANGER: Electric Shock Hazard. Ignoring this warning may lead to
death or serious injury. When raining or snowing, do not operate
outdoors or indoors where rain or snow enters freely or in extreme
temperatures.
Do not use under high temperature and humidity or extremely cold
temperature conditions. The tool is designed for use under an allowable
environmental temperature of 0 to 120°F.Operation at higher temperature may cause the
tool’s main unit to overheat. Operation at high temperature with high humidity may cause
the tool to fail due to condensation.
Also, do not operate the Cutting Edge Saw™ in very cold places or inside refrigerators
where the temperature is freezing or below.
Check The State of Your Work Site.
Before using the tool, check whether the state of the work site is as follows. Is the worksite
free of foreign objects, debris, water, ice, snow, powered electrical cables, and excessive
dust? Is the floor free of obstructions? Is their adequate ventilation? Is the worker prop -
erly insulated from the ground. Follow the operation instructions and avoid prohibited
items.
Remove Hazardous Substances.
Since the tool is an battery operated, it may spark and cause an explosion or a fire if oper -
ated near gas cylinders, thinner, or explosive and other hazardous substances or in a place
filled with flammable gas, etc. Therefore, do not use the tool in places where such haz -
ardous substances are present. Ignoring this warning may cause death or serious injury.
Never use the tool in places filled with flammable gas or near hazardous substances of
high flammability.