Energy Storage System ESS1.0 Manual
5.
Charging
5.1.
Charging single Battery
The following drawing shows the connection of a charging unit (charge controller or charger)
to the single battery.
• All of the equipment must be switched off during installation
• Avoid contact between plus and minus eyelets
• Check correct polarity of a charger
• Do not use any chargers for lead-gel or AGM batteries.
• Charge battery only on a non-flammable surface at ambient
temperatures of between 0°C and 55°C
• Do not connect solar panels directly to ESS1.0 battery
• If you would like to charge ESS1.0 with solar panels, an AC-DC converter
converting energy to standard line voltage have to be used
• In case you are unsuccessful with recharging a totally discharged
battery, contact BMZ POLAND
