Energy Storage System ESS1.0 Manual
4.
Startup and parallel connection
4.1.
Startup with individual batteries
4.2.
Startup with battery banks
• Avoid contacting terminals with unsecured hands.
• ESS1.0 battery should be mounted in horizontal position and protected
against any movement while working
• Absolutely do not wear any metallic jewelry, use only insulated tools
when staying or working on batteries.
• Suitable cable cross-sections for connecting should be used
• Prior to connection, proceed to cleaning of all contacts
• All of the equipment must be switched off during installation
• When connecting any equipment to ESS1.0, make sure that only
appropriate cable lugs or eyelets are used
• Be sure that all connections are firmly tightened
• Mind polarity when connecting equipment and chargers. Description of
terminals (positive and negative) is placed on enclosure of the battery
• Always connect first positive, then negative cable
• ESS1.0 battery should be mounted in horizontal position and protected
against any movement while working
• Do not place anything on the battery
• Do not disregard any safety installation instructions of individual
batteries (chapter
4.1
).
• All batteries connected in parallel
must
have same capacity, age and
state of charge and must be fully charged (separately) before their
interconnection.
Any differences in state of charge may induce extremely high
compensating currents overcharging cables and connectors or battery
itself. In worst case even fire or injury may be the result.
