BMW Z4, Руководство пользователя

Страница: 110 / 330

Installing child restraint
systems
General information
Pay attention to the specifications and the oper‐
ating and safety information of the child restraint
system manufacturer when selecting, installing,
and using child restraint systems.
Safety information
Warning
The protective effect of child restraint systems
and their fastening systems which have been
damaged or exposed to an accident can be lim‐
ited or lost. For instance, a child can may not be
sufficiently restrained in the event of an acci‐
dent or braking and evasive maneuvers. There
is a risk of injuries or danger to life.
Do not use damaged child restraint systems or
child restraint systems that have been exposed
to an accident, and replace them instead.
Have damaged child restraint systems or child
restraint systems exposed to an accident and
their fastening systems checked and, where
applicable, replaced by the dealer's service
center or another qualified service center or re‐
pair shop.
Warning
The stability of the child restraint system is lim‐
ited or compromised with incorrect seat adjust‐
ment or improper installation of the child seat.
There is a risk of injuries or danger to life. Make
sure that the child restraint system fits securely
against the backrest. If possible, adjust the
backrest tilt for all affected backrests and cor‐
rectly adjust the seats. Make sure that seats
and backrests are securely engaged or locked.
If possible, adjust the height of the head re‐
straints or remove them.
On the front passenger seat
Deactivating airbags
Warning
Active front-seat passenger airbags can injure a
child in a child restraint system when the air‐
bags are activated. There is a risk of injury.
Make sure that the front-seat passenger air‐
bags are deactivated and that the PASSEN‐
GER AIRBAG OFF indicator light lights up.
Before installing a child restraint system in the
front passenger seat, make sure that the front,
knee and side airbags on the front passenger
side are deactivated.
Deactivate the front-seat passenger airbags au‐
tomatically, refer to page
154 .
Seat position and height
Before installing a child restraint system, move
the front passenger seat as far back as it will go
and, if possible, bring it up to medium height.
This seat position and height ensure the best
possible position for the belt and offers optimal
protection in the event of an accident.
If the upper anchor of the safety belt is located in
front of the belt guide of the child seat, move the
front passenger seat carefully forward until the
best possible belt guide position is reached.
Backrest width
Adjustable backrest width: before installing a
child restraint system in the front passenger seat,
open the backrest width completely. Do not
change the backrest width again and do not call
up a memory position.
Seite 110
CONTROLS
Transporting children safely
110
Online Edition for Part no. 01402779113 - II/19