EN/20
Retrofit/Installation kit No. 65 90 0 025 169
Issue date: 10.2001
Installation instructions No. 01 29 0 030 090
Connect branch
B1
, coaxial plug casing on the
aerial extension for the GPS aerial
B
to the
coaxial socket casing (40) on the connection
cable for the GPS aerial (41).
Then lay the aerial extension for the GPS aerial
B
with branch
B2
, coaxial socket casing, along the
standard wiring harness as shown in the figure,
through the rubber grommet into the interior
of the car and secure it with textile adhesive
tape (43).
F 53 0739 B
B1
B
40
B2
41
43
42
F 53 0738 B
3
40
13
13
40 42
41
43
The figure shows the tailgate under the rear
spoiler from the outside.
Connect the GPS aerial (3) to the two stud
bolts (40) on the tailgate (41) and secure it with
two hexagonal nuts with washers M6 (13).
Thread the connection cable (42) for the GPS
aerial (3) through the opening in the tailgate (41)
into the interior of the car and fit the rubber
grommet (43).
F 53 0740 B
B2
B
Lay the aerial extension for the GPS aerial
B
with
branch
B2
, coaxial socket casing, along the
standard wiring harness as shown in the figure
to the installation site of the navigation computer
in the boot at the rear left and secure it with
textile adhesive tape or cable ties.
10. To install the navigation system
