BMW X1 2018, Руководство пользователя

Страница: 131 / 314

Orange lights
Active Cruise Control
The number bars shows the selected
distance from the vehicle driving ahead.
Camera-based cruise control with
Stop&Go function, ACC, refer to page 177 .
Vehicle detection, Active Cruise Control
Indicator light illuminates: a vehicle has
been detected ahead of you.
Indicator light flashes: the conditions are
not adequate for the system to work.
The system was deactivated but applies the
brakes until you actively resume control by
pressing on the brake pedal or accelerator pedal.
Yellow lights
Anti-lock Braking System ABS
Braking force boost may not be working.
Avoid abrupt braking. Take the longer
braking distance into account.
Have the system immediately checked
by a dealer’s service center or another
qualified service center or repair shop.
DSC Dynamic Stability Control
The indicator light flashes: DSC controls
the drive and braking forces. The vehicle
is stabilized. Reduce speed and modify
your driving style to the driving circumstances.
The indicator light lights up: DSC has malfunc‐
tioned.
Have the system checked by a dealer’s service
center or another qualified service center or re‐
pair shop.
DSC, refer to page
171 .
DSC Dynamic Stability Control is
deactivated or DTC Dynamic Traction
Control is activated
DSC is deactivated or DTC is activated.
DSC, refer to page
171 , and DTC, refer
to page 173 .
Flat Tire Monitor FTM
The Flat Tire Monitor signals a loss of
tire inflation pressure in a tire.
Reduce your speed and stop cautiously.
Avoid sudden braking and steering maneuvers.
Flat Tire Monitor, refer to page
158 .
Tire Pressure Monitor TPM
The indicator light lights up: the Tire
Pressure Monitor reports a low tire infla‐
tion pressure or a flat tire. Follow the in‐
formation in the Check Control message.
The indicator light flashes and then continuously
lights up: no flat tire or loss of tire inflation pres‐
sure can be detected.
▷ Interference caused by systems or devices
with the same radio frequency: after leaving
the area of the interference, the system auto‐
matically becomes active again.
▷ TPM was unable to complete the reset. Re‐
set the system again.
▷ A wheel without TPM wheel electronics is
mounted: have it checked by a dealer’s serv‐
ice center or another qualified service center
or repair shop as needed.
▷ Malfunction: have the system checked by a
dealer’s service center or another qualified
service center or repair shop.
Tire Pressure Monitor, refer to page 153 .
Steering system
Steering system in some cases not
working.
Seite 131
Displays
CONTROLS
131
Online Edition for Part no. 01402120596 - II/18