BMW VVDI2, Руководство пользователя

Страница: 30 / 50

BMW TOOL User Manual
Ver: 2.0
30
(
PICTURE
6.6-3)

Reset FEM to start: Reset the starter lock of the module

Read ISN from original key: Read ISN from the original key

Reset KM: Reset KM in the module, generally used to restore the original KM after
replacing the module

Enable Key: First insert a key that can start the car, turn on the ignition switch and
light up the dashboard, then read the disabled key position and select one that you
want to enable, click on enable key. After enabled, the key at this position will work
again. Attention: Only enable key does not require get key info

Disable Key: First insert a key that can start the car and switch on dashboard, then
select a work key position that you want to disable and click on disable key. The
disabled key cannot be the same as the key inserted into the ignition switch. The key
at this position will not be able to start the car after disabled, and add key at this
position will not start the car. Attention: Only disable key does not require get key
info

Emergency switch ON: When all key lost, turn on the ignition switch to activate
communication

Erase Key: Delete the key of the key position you choose