BMW SA640, Инструкция по установке, Страница: 15 / 33

3-22/EN
3.3 Connection overview of microphone wiring harness/speaker wiring harness
Fold out folded page 29.
Go back to section 2
Item Description Signal Cable colour
Cross-section
Connection location in car
IV Speaker wiring harness
Cars without a BMW Professional DSP hi-fi system
and without prepared speaker cabling only
IV/1
Socket contact TELNF+ black/white
(0.75 mm
2
)
White 12-pin socket casing X322 in the boot,
left-hand side, slot No. 9
IV/2
Socket contact TELNF- black/brown
(0.75 mm 2 )
White 12-pin socket casing X322 in the boot,
left-hand side, slot No. 10
IV/3
Socket contact Mute white/brown
(0.35 mm
2
)
Cars without an existing mute cable:
- Black 12-pin socket casing X322 in the boot,
left-hand side, slot No. 8
Cars with an existing mute cable:
-
Insulate and tie back on vehicle wiring harness
IV/4
Pin contact TELNF+ black/white
(0.75 mm
2
)
LHD car:
Door plug X18196, slot No. 6
RHD car:
Door plug X18198, slot No. 6
IV/5
Pin contact TELNF- black/brown
(0.75 mm 2 )
LHD car:
Door plug X18196, slot No. 2
RHD car:
Door plug X18198, slot No. 2
IV/6
Socket contact Mute white/brown
(0.35 mm
2
)
Cars without an existing mute cable:
- Enclosed 2-pin socket casing (28) from switch
module
V
, slot No. 2
Cars with an existing mute cable:
- Insulate and tie back on wiring harness
III Microphone wiring harness
III/1
3-pin plug casing – – Branch
I/1
from connection wiring harness
I
III/2
3-pin socket casing – – Microphone B400 at interior light, front