BMW Mountain Bike Enduro Скачать руководство пользователя

Страница: 5 / 101

1 Welcome.

Congratulations for having purchased your new BMW bicycle!

This manual contains information on the safe operation and mainte-

nance of your BMW bicycle. Furthermore, it describes the risks and

dangers in case of incorrect handling.

Please read these instructions thoroughly before you set off for the first

time.

Contact your BMW partner or a bicycle specialist shop of your trust for

all service or repair to be done on your bicycle.

Handover report, bicycle data and registration.

To validate your warranty, the bicycle must be handed over properly,

unless it was purchased at www.bmw-shop.com, and the handover

report completed in full. Be sure to thoroughly fill in all bicycle data into

the handover report for an easier identification, e.g. in the event of loss or

theft. The frame number of your BMW bicycle is marked on the under-

side of the bottom bracket shell.

Handover report: original and copies.

Send the original to the following address of G.B.S. Global Bike Service

Ltd. There is one copy for the salesman and one copy for the buyer.

G.B.S. Global Bike Service ltd.

codeword: BmW Bike Registration

Wichernstraße 7

D-97525 Schwebheim

When you send the handover report to G.B.S. Global Bike Service Ltd.

your BMW bicycle will be registered. We shall be pleased to confirm the

purchase of your BMW bicycle as soon as it will be registered.

To find more films, downloads and information on BMW bikes as well as

further BMW lifestyle products, please visit us at www.bmw-shop.com.

In purchasing this bicycle you have chosen a product of high quality and

technology. Each component of your new bicycle has been designed,

manufactured and assembled with great care and expertise. Your BMW

partner gave the bicycle its final assembly and performed a function

check to guarantee proper operation. You can now set off to enjoy your

new bicycle feeling safe and secure.

This manual contains a wealth of information on the proper use of your

bicycle, its maintenance and operation as well as interesting details

about bicycle design and engineering. Please read these instructions

thoroughly. We are sure that even if you have been cycling all your life

you will find it worthwhile. Bicycle technology has developed at a rapid

pace during recent years. Therefore, before setting off on your new bicy-

cle, be sure to read at least the chapter

“Before Your FIRST Ride“

To have as much fun as possible during cycling, be sure to carry out the

minimum functional check described in chapter

“Before eVeRY Ride”

before setting off. This manual cannot teach you the skills of a bicycle

mechanic. Even a manual as big as an encyclopaedia could not describe

every possible combination of available bicycles and components. It

therefore focuses on your newly purchased bicycle and standard com-

ponents providing important information and warnings.

Содержание Mountain Bike Enduro






































































































Результаты поиска

Содержание Mountain Bike Enduro

Отзывы:

Похожие инструкции для Mountain Bike Enduro

Бренды по названию

Популярные бренды

BMW Mountain Bike Enduro, Руководство пользователя

Результаты поиска

Содержание Mountain Bike Enduro

Отзывы:

Похожие инструкции для Mountain Bike Enduro

Бренды по названию

Популярные бренды