54
Ma
in
te
n
a
n
c
e
a
n
d
ca
re
2
Jump starting
Jump starting
Do not attempt to jump-start
the motorcycle using the
on-board socket.
Risk of fire.
The wires leading to the power
socket do not have a load-ca-
pacity rating adequate for jump-
starting the engine.
If you switch on the ignition and
the indicator lights fail to light
up, the battery is completely
flat. In this case, do not attempt
to jump-start the motorcycle:
recharge the battery instead.
Risk of damaging the control
units.
Do not use proprietary start-
assist sprays or other products
to start the engine. If the motor-
cycle’s battery charge level is
low, you can start the engine of
your motorcycle with the aid of
another vehicle’s 12 V battery
and two jump leads. By the
same token, you can jump start
another motorcycle. Use only
jump leads fitted with fully insu-
lated crocodile clips at both
ends.
• When jump-starting the
engine, do not disconnect the
battery from the on-board
electrical system
Do not touch live compo-
nents of the ignition system
while the engine is running
– Risk of fatal accident
20LTbku7.book Seite 54 Montag, 4. Juli 2005 9:27 09
