background image

1

1

BM

W S

e

rvic

e

For safety reasons and to main-
tain the value of your motorcy-
cle, regular maintenance 
intervals have been laid down. 
Always keep to the specified 
maintenance intervals. This is 
the only way to ensure that war-
ranty claims are not invalidated.
The contents of the mainte-
nance schedules are subject to 
change, for reasons of safety, 
due to modifications in, among 
other things, materials.
Your authorized BMW motorcy-
cle retailer can provide informa-
tion on the currently specified 
Service, Inspection and Annual 
Service work needed.

Important:

BMW refuses to accept liability 
for damage or consequential 
damage due to repairs or ser-
vice work performed by other 
than BMW-authorized work-
shops.

Consequently, we advise you to 
have service and maintenance 
performed by your authorized 
BMW motorcycle retailer's spe-
cially trained, expert personnel, 
and confirmed by an entry in the 
Maintenance Instructions.
Authorized BMW motorcycle 
retailers are supplied with the 
latest technical information and 
have the necessary technical 
know-how and specially trained 
staff.
Please do not hesitate to con-
tact your authorized BMW 
motorcycle retailer on all mat-
ters concerning your 
motorcycle. 
Authorized BMW motorcycle 
retailers are fully informed about 
all aspects of your motorcycle 
and will gladly advise and assist 
you.

Best wishes,

BMW Motorrad

Dear motorcycle enthusiast

20LT01u7.fm  Seite 1  Montag, 21. Mai 2007  3:49 15

Содержание MOTORRAD K 1200 LT





















































































Отзывы: