BMW M2 COUPE, Руководство пользователя

Страница: 101 / 247

DSC Dynamic Stability Control, refer to
page
135 .
DSC Dynamic Stability Control deactivated
DSC Dynamic Stability Control is deac‐
tivated.
DSC Dynamic Stability Control, refer to
page 135 .
M Dynamic Mode MDM
M Dynamic Mode MDM is switched on.
M Dynamic Mode, refer to page
136 .
Indicator light also flashes: MDM con‐
trols the drive and braking forces. The
vehicle is stabilized.
The indicator light illuminates: MDM
has malfunctioned. Have the system
checked by a dealer’s service center or
another qualified service center or re‐
pair shop.
M Dynamic Mode, refer to page 136 .
Flat Tire Monitor FTM
The Flat Tire Monitor signals a loss of
tire inflation pressure in a tire.
Reduce your speed and stop cau‐
tiously. Avoid sudden braking and steering ma‐
neuvers.
Flat Tire Monitor, refer to page
124 .
Tire Pressure Monitor TPM
The indicator light illuminates.
The Tire Pressure Monitor reports a
low tire inflation pressure or a flat tire.
Follow the information in the Check Control
message.
The indicator light flashes and then illuminates
continuously.
No flat tire or loss of tire inflation pressure can
be detected.
▷ Interference caused by systems or devices
with the same radio frequency: after leav‐
ing the area of the interference, the system
automatically becomes active again.
▷ TPM was unable to complete the reset.
Reset the system again.
▷ A wheel without TPM wheel electronics is
mounted: have it checked by a dealer’s
service center or another qualified service
center or repair shop as needed.
▷ Malfunction: have the system checked by a
dealer’s service center or another qualified
service center or repair shop.
Tire Pressure Monitor, refer to page 120 .
Steering system
Steering system in some cases not
working.
Have the system checked by a dealer’s
service center or another qualified service cen‐
ter or repair shop.
Emissions
▷ The warning light lights up:
Emissions are deteriorating. Have
the vehicle checked as soon as
possible.
▷ The warning light flashes under certain cir‐
cumstances:
This indicates that there is excessive mis‐
firing in the engine.
Reduce the vehicle speed and have the
system checked immediately; otherwise,
serious engine misfiring within a brief pe‐
riod can seriously damage emission con‐
trol components, in particular the catalytic
converter.
Socket for Onboard Diagnosis, refer to
page
211 .
Seite 101
Displays Controls
101
Online Edition for Part no. 01402981836 - VI/17