BMW K 1200 S Скачать руководство пользователя страница 24

Страница: 24 / 163

Sta

s i

Electronic immobilizer EWS

EWS symbol is
displayed.

The key being used is not
authorized for starting or
communication between the
key and engine electronics is
disrupted.
• Remove other ignition keys

located at the ignition key
(

30).

• Use the replacement key.
• Have the defective key

replaced by an authorized
BMW motorcycle retailer
(

32).

Fuel reserve

General warning light
lights up in yellow.
Fuel reserve symbol is
displayed and flashes

10 times.

The fuel tank contains a fuel
reserve of maximum 4 liters.
The Tripmaster indicates the
probable residual operating
range (

34).

A fuel shortage can lead
to the motor dying unex-

pectedly, and can therefore
result in dangerous driving
situations.
Do not drive until the fuel tank
is completely empty.

A fuel shortage can lead
to backfiring, and can

therefore result in damage to
the catalytic converter.
Do not drive until the fuel tank
is completely empty.

• Refuel.

Coolant temperature

General warning light
lights up in red.
Coolant temperature
indicator flashes

10 times.

Coolant temperature too high.

Continued driving with an
overheated engine can

result in engine damage.
Always observe the measures
listed below.

• Check coolant level, top up if

necessary.

• If possible, ride in the part-

load range to cool down the
engine.

• In traffic jams, switch off the

engine, but keep the ignition
on so that the radiator fan
continues to operate.

Содержание K 1200 S




































































































































































Результаты поиска

Содержание K 1200 S

Отзывы:

Бренды по названию

Популярные бренды

BMW K 1200 S, Руководство пользователя для мотоциклиста

Результаты поиска

Содержание K 1200 S

Отзывы:

Бренды по названию

Популярные бренды